单片机蜂鸣器响生日快乐编程程序
#include
#define uint unsigned int
#define uchar unsigned char
sbit speaker=P1^0; //学校给的学习板次了点，用两个I/O口控制蜂鸣器。不过大多数的学习板是一个I/O口控制。
sbit speaker1=P1^1; //如果你的板是一个I/O控制的，这行可以删掉。
uint k,i;
unsigned char timer0h,timer0l,time;
//生日歌
code unsigned char sszymmh[]={
5,1,1, 5,1,1, 6,1,2, 5,1,2, 1,2,2, 7,1,4,
5,1,1, 5,1,1, 6,1,2, 5,1,2, 2,2,2, 1,2,4,
5,1,1, 5,1,1, 5,2,2, 3,2,2, 1,2,2, 7,1,2, 6,1,2,
4,2,1, 4,2,1, 3,2,2, 1,2,2, 2,2,2, 1,2,4};
// 音阶频率表 高八位
code unsigned char FREQH[]={
0xF2,0xF3,0xF5,0xF5,0xF6,0xF7,0xF8,
0xF9,0xF9,0xFA,0xFA,0xFB,0xFB,0xFC,0xFC, //1,2,3,4,5,6,7,8,i
0xFC,0xFD,0xFD,0xFD,0xFD,0xFE,
0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0xFF,
} ;// 音阶频率表 低八位
code unsigned char FREQL[]={
0x42,0xC1,0x17,0xB6,0xD0,0xD1,0xB6,
0x21,0xE1,0x8C,0xD8,0x68,0xE9,0x5B,0x8F, //1,2,3,4,5,6,7,8,i
0xEE,0x44, 0x6B,0xB4,0xF4,0x2D,
0x47,0x77,0xA2,0xB6,0xDA,0xFA,0x16,
};
void delay(unsigned char t)
{
unsigned char t1;
unsigned long t2;
for(t1=0;t1<t;t1++)
{
for(t2=0;t2<8000;t2++)
{
;
}
}
TR0=0;
}
void t0int() interrupt 1
{
TR0=0;
speaker=!speaker;
TH0=timer0h;
TL0=timer0l;
TR0=1;
}
void song()
{
TH0=timer0h;
TL0=timer0l;
TR0=1;
delay(time);
}
void main(void)
{
speaker1=0; //一个I/O控制的话这行也要删掉
//unsigned int k,i;
TMOD=1; //置CT0定时工作方式1
EA=1;
ET0=1;//IE=0x82 //CPU开中断,CT0开中断
while(1)
{
i=0;
while(i<75)
{ //音乐数组长度 ，唱完从头再来
k=sszymmh[i]+7*sszymmh[i+1]-1;
timer0h=FREQH[k];
timer0l=FREQL[k];
time=sszymmh[i+2];
i=i+3;
song();
}
}
}
附上电路图：
