Linux 安装U盘的过程

1：确定你的内核支持U番

<1>：SCSI的选项默认就可以

<2>：USB的选项一定要安装<*> USB Mass Storage support

<3>：如下：

代码:

<*> SCSI support

--- SCSI support type (disk, tape, CD-ROM)

<*> SCSI disk support

(40) Maximum number of SCSI disks that can be loaded as modules

< > SCSI tape support

< > SCSI OnStream SC-x0 tape support

< > SCSI CD-ROM support

< > SCSI generic support

--- Some SCSI devices (e.g. CD jukebox) support multiple LUNs

[*] Enable extra checks in new queueing code

[*] Probe all LUNs on each SCSI device

[*] Verbose SCSI error reporting (kernel size =12K)

[ ] SCSI logging facility

SCSI low-level drivers -

PCMCIA SCSI adapter support -

<*> USB Mass Storage support

[ ] USB Mass Storage verbose debug

[ ] Freecom USB/ATAPI Bridge support

[ ] ISD-200 USB/ATA Bridge support

[ ] Microtech CompactFlash/SmartMedia support

2：fdisk -l /dev/sda看看有没有sda1列出来

3：如果有,

mkdir /mnt/usb

mount /dev/sda1 /mnt/usb -t vfat(当然也可能是msdos)

4：其他：

<1>：在/etc/fstab里面加入：

[/code]/dev/sda1 /mnt/usb vfat user,noauto,codepage=936,iocharset=cp936,umask=022 0 0[/code]

可以保证任何一个用户都可以mount USB番,并且启动时不加载

<2>：关于中文,在本站有很多相关的文章,自己编译内核,把CP936编译成为Native Language.