CC1101的功能强大远比于24L01。尤其通讯距离和低功耗。CC1101的数据手册网络上很多，找个搜索软件一搜一片一片的。。CC1101与MSP430F5438的无线通信CC1101与MSP430F5438的无线通信CC1101与MSP430F5438的无线通信不过我建议大家还是去ti的官网吧，那里的资料比较权威，也省得一些中文化的误解导致自己白花好几天的功夫。。
我在CC1101通讯的时候主要值得注意的，1、SPI的底层是个基础，包括单片机带的SPI接口也好，自己用IO口实现也好，怎么来实现和硬件之间的链接了。2、编程实现的时候注意时序问题。。SPI的时序都一样，但是操作芯片的时候可能有应答，可能没有应答。。3、花最大功夫研究里面的寄存器的配置。整个通讯成功与否，通讯效果好不好都在寄存器的配置上。。个人认为必须理解各个寄存器的作用及使用的目的及意义了。。4、GDO0等IO口的配置在整个系统中的运用非常重要。常见配置值0x01,0x02,0x03,0x06,0x07，其中配置值最为常用配置0x06了，但是了，对于各种需求可以相应修改了，具体手册上写的比较明白。。
以下为2个CC1101和一个MSP430F5438的一发一收通讯测试程序，实验证明通讯效果比，MC31213（xbee），2401AG,24L01都强，表现在1、通讯视距中有障碍物（如一般水泥墙壁）不影响通讯；2、整个系统电流消耗比较小大约电流在10D多个ma。具体代码如下。
//*****************************************************************************
//
// 【名称】：CC1101测试程序
// 【功能】：一个开发板实现两个CC1101模块间通讯
// 【版本】：V1.0
// 【作者】：刘
// 【日期】：2011-11-28 14:05:00
// 【说明】：软件版本定义为：V1.0为初始版本，以后改进完善的版本以此类推为V2.0，V3.0.......
//
//*****************************************************************************
//
// 【功能】：头文件定义
//
//*****************************************************************************
#include <msp430x54x.h>
//*****************************************************************************
// 常量定义
//*****************************************************************************
#define WRITE_BURST 0x40 //连续写入
#define READ_SINGLE 0x80 //读
#define READ_BURST 0xC0 //连续读
#define BYTES_IN_RXFIFO 0x7F //接收缓冲区的有效字节数
#define CRC_OK 0x80 //CRC校验通过位标志
//*****************************************************************************
#define Set_CC1101_GDO0_1 P1OUT |= BIT0;
#define Clr_CC1101_GDO0_1 P1OUT &= ~BIT0;
#define Set_CC1101_GDO2_1 P1OUT |= BIT2;
#define Clr_CC1101_GDO2_1 P1OUT &= ~BIT2;
#define Set_CC1101_MISO_1 P1OUT |= BIT4;
#define Clr_CC1101_MISO_1 P1OUT &= ~BIT4;
#define Set_CC1101_MOSI_1 P1OUT |= BIT6;
#define Clr_CC1101_MOSI_1 P1OUT &= ~BIT6;
#define Set_CC1101_SCK_1 P2OUT |= BIT0;
#define Clr_CC1101_SCK_1 P2OUT &= ~BIT0;
#define Set_CC1101_CSN_1 P2OUT |= BIT2;
#define Clr_CC1101_CSN_1 P2OUT &= ~BIT2;
#define Set_CC1101_GDO0_2 P3OUT |= BIT0;
#define Clr_CC1101_GDO0_2 P3OUT &= ~BIT0;
#define Set_CC1101_GDO2_2 P3OUT |= BIT2;
#define Clr_CC1101_GDO2_2 P3OUT &= ~BIT2;
#define Set_CC1101_MISO_2 P3OUT |= BIT4;
#define Clr_CC1101_MISO_2 P3OUT &= ~BIT4;
#define Set_CC1101_MOSI_2 P3OUT |= BIT6;
#define Clr_CC1101_MOSI_2 P3OUT &= ~BIT6;
#define Set_CC1101_SCK_2 P4OUT |= BIT0;
#define Clr_CC1101_SCK_2 P4OUT &= ~BIT0;
#define Set_CC1101_CSN_2 P4OUT |= BIT2;
#define Clr_CC1101_CSN_2 P4OUT &= ~BIT2;
//*****************************************************************************
unsigned char PaTabel[8] = {0x60 ,0x60 ,0x60 ,0x60 ,0x60 ,0x60 ,0x60 ,0x60};
//*****************************************************************************
unsigned char TxBuf[4]={0x01,0x02,0x03,0x00};
unsigned char RxBuf[4]={0x11,0x22,0x33,0x00};
//*****************************************************************************
void InitSys();
void delay(unsigned int s);
void IOinit(void);
void SpiInit(void);
void CpuInit(void);
void RESET_CC1100(unsigned char ch);
void POWER_UP_RESET_CC1100(void);
void halSpiWriteReg(unsigned char addr, unsigned char value,unsigned char ch);
void halSpiWriteBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count,unsigned char ch);
void halSpiStrobe(unsigned char strobe,unsigned char ch);
unsigned char halSpiReadReg(unsigned char addr,unsigned char ch);
void halSpiReadBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count,unsigned char ch);
unsigned char halSpiReadStatus(unsigned char addr,unsigned char ch);
void halRfWriteRfSettings(void);
void halRfSendPacket(unsigned char *txBuffer, unsigned char size,unsigned char ch);
unsigned char halRfReceivePacket(unsigned char *rxBuffer, unsigned char *length,unsigned char ch);
unsigned char SpiTxRxByte(unsigned char dat,unsigned char ch);
void setRxMode(void);
//*****************************************************************************
// CC1100 STROBE, CONTROL AND STATUS REGSITER
#define CCxxx0_IOCFG2 0x00 // GDO2 output pin configuration
#define CCxxx0_IOCFG1 0x01 // GDO1 output pin configuration
#define CCxxx0_IOCFG0 0x02 // GDO0 output pin configuration
#define CCxxx0_FIFOTHR 0x03 // RX FIFO and TX FIFO thresholds
#define CCxxx0_SYNC1 0x04 // Sync word, high INT8U
#define CCxxx0_SYNC0 0x05 // Sync word, low INT8U
#define CCxxx0_PKTLEN 0x06 // Packet length
#define CCxxx0_PKTCTRL1 0x07 // Packet automation control
#define CCxxx0_PKTCTRL0 0x08 // Packet automation control
#define CCxxx0_ADDR 0x09 // Device address
#define CCxxx0_CHANNR 0x0A // Channel number
#define CCxxx0_FSCTRL1 0x0B // Frequency synthesizer control
#define CCxxx0_FSCTRL0 0x0C // Frequency synthesizer control
#define CCxxx0_FREQ2 0x0D // Frequency control word, high INT8U
#define CCxxx0_FREQ1 0x0E // Frequency control word, middle INT8U
#define CCxxx0_FREQ0 0x0F // Frequency control word, low INT8U
#define CCxxx0_MDMCFG4 0x10 // Modem configuration
#define CCxxx0_MDMCFG3 0x11 // Modem configuration
#define CCxxx0_MDMCFG2 0x12 // Modem configuration
#define CCxxx0_MDMCFG1 0x13 // Modem configuration
#define CCxxx0_MDMCFG0 0x14 // Modem configuration
#define CCxxx0_DEVIATN 0x15 // Modem deviation setting
#define CCxxx0_MCSM2 0x16 // Main Radio Control State Machine configuration
#define CCxxx0_MCSM1 0x17 // Main Radio Control State Machine configuration
#define CCxxx0_MCSM0 0x18 // Main Radio Control State Machine configuration
#define CCxxx0_FOCCFG 0x19 // Frequency Offset Compensation configuration
#define CCxxx0_BSCFG 0x1A // Bit Synchronization configuration
#define CCxxx0_AGCCTRL2 0x1B // AGC control
#define CCxxx0_AGCCTRL1 0x1C // AGC control
#define CCxxx0_AGCCTRL0 0x1D // AGC control
#define CCxxx0_WOREVT1 0x1E // High INT8U Event 0 timeout
#define CCxxx0_WOREVT0 0x1F // Low INT8U Event 0 timeout
#define CCxxx0_WORCTRL 0x20 // Wake On Radio control
#define CCxxx0_FREND1 0x21 // Front end RX configuration
#define CCxxx0_FREND0 0x22 // Front end TX configuration
#define CCxxx0_FSCAL3 0x23 // Frequency synthesizer calibration
#define CCxxx0_FSCAL2 0x24 // Frequency synthesizer calibration
#define CCxxx0_FSCAL1 0x25 // Frequency synthesizer calibration
#define CCxxx0_FSCAL0 0x26 // Frequency synthesizer calibration
#define CCxxx0_RCCTRL1 0x27 // RC oscillator configuration
#define CCxxx0_RCCTRL0 0x28 // RC oscillator configuration
#define CCxxx0_FSTEST 0x29 // Frequency synthesizer calibration control
#define CCxxx0_PTEST 0x2A // Production test
#define CCxxx0_AGCTEST 0x2B // AGC test
#define CCxxx0_TEST2 0x2C // Various test settings
#define CCxxx0_TEST1 0x2D // Various test settings
#define CCxxx0_TEST0 0x2E // Various test settings
// Strobe commands
#define CCxxx0_SRES 0x30 // Reset chip.
#define CCxxx0_SFSTXON 0x31 // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1).
// If in RX/TX: Go to a wait state where only the synthesizer is
// running (for quick RX / TX turnaround).
#define CCxxx0_SXOFF 0x32 // Turn off crystal oscillator.
#define CCxxx0_SCAL 0x33 // Calibrate frequency synthesizer and turn it off
// (enables quick start).
#define CCxxx0_SRX 0x34 // Enable RX. Perform calibration first if coming from IDLE and
// MCSM0.FS_AUTOCAL=1.
#define CCxxx0_STX 0x35 // In IDLE state: Enable TX. Perform calibration first if
// MCSM0.FS_AUTOCAL=1. If in RX state and CCA is enabled:
// Only go to TX if channel is clear.
#define CCxxx0_SIDLE 0x36 // Exit RX / TX, turn off frequency synthesizer and exit
// Wake-On-Radio mode if applicable.
#define CCxxx0_SAFC 0x37 // Perform AFC adjustment of the frequency synthesizer
#define CCxxx0_SWOR 0x38 // Start automatic RX polling sequence (Wake-on-Radio)
#define CCxxx0_SPWD 0x39 // Enter power down mode when CSn goes high.
#define CCxxx0_SFRX 0x3A // Flush the RX FIFO buffer.
#define CCxxx0_SFTX 0x3B // Flush the TX FIFO buffer.
#define CCxxx0_SWORRST 0x3C // Reset real time clock.
#define CCxxx0_SNOP 0x3D // No operation. May be used to pad strobe commands to two
// INT8Us for simpler software.
#define CCxxx0_PARTNUM 0x30
#define CCxxx0_VERSION 0x31
#define CCxxx0_FREQEST 0x32
#define CCxxx0_LQI 0x33
#define CCxxx0_RSSI 0x34
#define CCxxx0_MARCSTATE 0x35
#define CCxxx0_WORTIME1 0x36
#define CCxxx0_WORTIME0 0x37
#define CCxxx0_PKTSTATUS 0x38
#define CCxxx0_VCO_VC_DAC 0x39
#define CCxxx0_TXBYTES 0x3A
#define CCxxx0_RXBYTES 0x3B
#define CCxxx0_PATABLE 0x3E
#define CCxxx0_TXFIFO 0x3F
#define CCxxx0_RXFIFO 0x3F
// RF_SETTINGS is a data structure which contains all relevant CCxxx0 registers
typedef struct S_RF_SETTINGS
{
unsigned char FSCTRL2; //自已加的
unsigned char FSCTRL1; // Frequency synthesizer control.
unsigned char FSCTRL0; // Frequency synthesizer control.
unsigned char FREQ2; // Frequency control word, high INT8U.
unsigned char FREQ1; // Frequency control word, middle INT8U.
unsigned char FREQ0; // Frequency control word, low INT8U.
unsigned char MDMCFG4; // Modem configuration.
unsigned char MDMCFG3; // Modem configuration.
unsigned char MDMCFG2; // Modem configuration.
unsigned char MDMCFG1; // Modem configuration.
unsigned char MDMCFG0; // Modem configuration.
unsigned char CHANNR; // Channel number.
unsigned char DEVIATN; // Modem deviation setting (when FSK modulation is enabled).
unsigned char FREND1; // Front end RX configuration.
unsigned char FREND0; // Front end RX configuration.
unsigned char MCSM0; // Main Radio Control State Machine configuration.
unsigned char FOCCFG; // Frequency Offset Compensation Configuration.
unsigned char BSCFG; // Bit synchronization Configuration.
unsigned char AGCCTRL2; // AGC control.
unsigned char AGCCTRL1; // AGC control.
unsigned char AGCCTRL0; // AGC control.
unsigned char FSCAL3; // Frequency synthesizer calibration.
unsigned char FSCAL2; // Frequency synthesizer calibration.
unsigned char FSCAL1; // Frequency synthesizer calibration.
unsigned char FSCAL0; // Frequency synthesizer calibration.
unsigned char FSTEST; // Frequency synthesizer calibration control
unsigned char TEST2; // Various test settings.
unsigned char TEST1; // Various test settings.
unsigned char TEST0; // Various test settings.
unsigned char IOCFG2; // GDO2 output pin configuration
unsigned char IOCFG0; // GDO0 output pin configuration
unsigned char PKTCTRL1; // Packet automation control.
unsigned char PKTCTRL0; // Packet automation control.
unsigned char ADDR; // Device address.
unsigned char PKTLEN; // Packet length.
} RF_SETTINGS;
const RF_SETTINGS rfSettings =
{
0x00,
0x08, // FSCTRL1 Frequency synthesizer control.
0x00, // FSCTRL0 Frequency synthesizer control.
0x10, // FREQ2 Frequency control word, high byte.
0xA7, // FREQ1 Frequency control word, middle byte.
0x62, // FREQ0 Frequency control word, low byte.
0x5B, // MDMCFG4 Modem configuration.
0xF8, // MDMCFG3 Modem configuration.
0x03, // MDMCFG2 Modem configuration.
0x22, // MDMCFG1 Modem configuration.
0xF8, // MDMCFG0 Modem configuration.
0xff, // CHANNR Channel number.
0x47, // DEVIATN Modem deviation setting (when FSK modulation is enabled).
0xB6, // FREND1 Front end RX configuration.
0x10, // FREND0 Front end RX configuration.
0x18, // MCSM0 Main Radio Control State Machine configuration.
0x1D, // FOCCFG Frequency Offset Compensation Configuration.
0x1C, // BSCFG Bit synchronization Configuration.
0xC7, // AGCCTRL2 AGC control.
0x00, // AGCCTRL1 AGC control.
0xB2, // AGCCTRL0 AGC control.
0xEA, // FSCAL3 Frequency synthesizer calibration.
0x2A, // FSCAL2 Frequency synthesizer calibration.
0x00, // FSCAL1 Frequency synthesizer calibration.
0x11, // FSCAL0 Frequency synthesizer calibration.
0x59, // FSTEST Frequency synthesizer calibration.
0x81, // TEST2 Various test settings.
0x35, // TEST1 Various test settings.
0x09, // TEST0 Various test settings.
0x0B, // IOCFG2 GDO2 output pin configuration.
0x06, // IOCFG0D GDO0 output pin configuration. Refer to SmartRF?Studio User Manual for detailed pseudo register explanation.
0x04, // PKTCTRL1 Packet automation control.
0x05, // PKTCTRL0 Packet automation control.
0xff, // ADDR Device address.
0x0c // PKTLEN Packet length.
};
//*****************************************************************************
//
// 【名称】 IOinit
// 【功能】 单片机IO口初始化
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void IOinit(void)
{
P1DIR &= ~(BIT0 + BIT2 + BIT4);
P1DIR |= BIT6;
P2DIR |= BIT0 + BIT2;
P3DIR &= ~(BIT0 + BIT2 + BIT4);
P3DIR |= BIT6;
P4DIR |= BIT0 + BIT2;
P10DIR |= BIT6 + BIT7;
}
//*****************************************************************************
//
// 【名称】 delay
// 【功能】 软件延时
// 【参数】 S：时间
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void delay(unsigned int s)
{
while (s != 0)
{
s--;
}
}
//*****************************************************************************
//
// 【名称】 InitSys
// 【功能】 晶振初始化
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void InitSys()
{
int i;
WDTCTL = WDTPW + WDTHOLD;
P5SEL |= 0x0C;
UCSCTL6 &= ~XT2DRIVE_1;
UCSCTL4 |= SELS__XT2CLK;
for(i=0xFF;i>0;i--);
UCSCTL7 &= ~(XT2OFFG + DCOFFG);
SFRIFG1 &= ~OFIFG;
}
//*****************************************************************************
//
// 【名称】 halWait
// 【功能】 短延时
// 【参数】 timeout：时间
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halWait(unsigned int timeout)
{
do
{
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
_NOP();
}
while (--timeout);
}
//*****************************************************************************
//
// 【名称】 SpiInit
// 【功能】 无线通讯模块初始化
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void SpiInit(void)
{
Clr_CC1101_CSN_1;
Clr_CC1101_SCK_1;
Set_CC1101_CSN_1;
Clr_CC1101_CSN_2;
Clr_CC1101_SCK_2;
Set_CC1101_CSN_2;
}
//*****************************************************************************
//
// 【名称】 CpuInit
// 【功能】 单片机初始化
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void CpuInit(void)
{
InitSys();
IOinit();
SpiInit();
}
//*****************************************************************************
//
// 【名称】 SpiTxRxByte
// 【功能】 读写一字节
// 【参数】 dat：写入数据
// ch:通道
// 【返回】 状态值或读取值
// 【说明】 无
//
//*****************************************************************************
unsigned char SpiTxRxByte(unsigned char dat,unsigned char ch)
{
unsigned char i,temp;
temp = 0;
switch (ch)
{
case 1:
Clr_CC1101_SCK_1;
for(i=0; i<8; i++)
{
if(dat & 0x80)
{
Set_CC1101_MOSI_1;
}
else
{
Clr_CC1101_MOSI_1;
}
dat <<= 1;
Set_CC1101_SCK_1;
delay(20);
temp <<= 1;
if(P1IN&0x10)
{
temp++;
}
Clr_CC1101_SCK_1;
delay(20);
}
break;
case 2:
Clr_CC1101_SCK_2;
for(i=0; i<8; i++)
{
if(dat & 0x80)
{
Set_CC1101_MOSI_2;
}
else
{
Clr_CC1101_MOSI_2;
}
dat <<= 1;
Set_CC1101_SCK_2;
delay(20);
temp <<= 1;
if(P3IN&0x10)
{
temp++;
}
Clr_CC1101_SCK_2;
delay(10);
}
break;
}
return temp;
}
//*****************************************************************************
//
// 【名称】 RESET_CC1100
// 【功能】 复位芯片
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void RESET_CC1100(unsigned char ch)
{
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10 );
SpiTxRxByte(CCxxx0_SRES,1);
while (P1IN & 0x10);
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(CCxxx0_SRES,2);
while (P3IN & 0x10);
Set_CC1101_CSN_2;
break;
}
}
//*****************************************************************************
//
// 【名称】 POWER_UP_RESET_CC1100
// 【功能】 上电复位
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void POWER_UP_RESET_CC1100(void)
{
Set_CC1101_CSN_1;
halWait(1);
Clr_CC1101_CSN_1;
halWait(1);
Set_CC1101_CSN_1;
halWait(41);
RESET_CC1100(1);
Set_CC1101_CSN_2;
halWait(1);
Clr_CC1101_CSN_2;
halWait(1);
Set_CC1101_CSN_2;
halWait(41);
RESET_CC1100(2);
}
//*****************************************************************************
//
// 【名称】 halSpiWriteReg
// 【功能】 写寄存器
// 【参数】 addr:地址
// value:值
// ch:模块通道
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halSpiWriteReg(unsigned char addr, unsigned char value,unsigned char ch)
{
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(addr,1);
SpiTxRxByte(value,1);
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(addr,2);
SpiTxRxByte(value,2);
Set_CC1101_CSN_2;
break;
}
}
//*****************************************************************************
//
// 【名称】 halSpiWriteBurstReg
// 【功能】 连续写寄存器
// 【参数】 addr:地址
// *buffer:值
// count:个数
// ch:模块通道
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halSpiWriteBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count,unsigned char ch)
{
unsigned char i, temp;
temp = addr | WRITE_BURST;
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(temp,1);
for (i = 0; i < count; i++)
{
SpiTxRxByte(buffer[i],1);
}
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(temp,2);
for (i = 0; i < count; i++)
{
SpiTxRxByte(buffer[i],2);
}
Set_CC1101_CSN_2;
break;
}
}
//*****************************************************************************
//
// 【名称】 halSpiStrobe
// 【功能】 写命令
// 【参数】 strobe:命令
// ch:模块通道
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halSpiStrobe(unsigned char strobe,unsigned char ch)
{
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(strobe,1);
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(strobe,2);
Set_CC1101_CSN_2;
break;
}
}
//*****************************************************************************
//
// 【名称】 halSpiReadReg
// 【功能】 读取状态
// 【参数】 addr:地址
// ch:模块通道
// 【返回】 状态值
// 【说明】 无
//
//*****************************************************************************
unsigned char halSpiReadReg(unsigned char addr,unsigned char ch)
{
unsigned char temp, value;
temp = addr|READ_SINGLE;
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(temp,1);
value = SpiTxRxByte(0,1);
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(temp,2);
value = SpiTxRxByte(0,2);
Set_CC1101_CSN_2;
break;
}
return value;
}
//*****************************************************************************
//
// 【名称】 halSpiReadBurstReg
// 【功能】 读取状态
// 【参数】 addr:地址
// *buffer:返回值
// count:连续读取值
// ch:模块通道
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halSpiReadBurstReg(unsigned char addr, unsigned char *buffer, unsigned char count,unsigned char ch)
{
unsigned char i,temp;
temp = addr | READ_BURST;
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(temp,1);
for (i = 0; i < count; i++)
{
buffer[i] = SpiTxRxByte(0,1);
}
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(temp,2);
for (i = 0; i < count; i++)
{
buffer[i] = SpiTxRxByte(0,2);
}
Set_CC1101_CSN_2;
break;
}
}
//*****************************************************************************
//
// 【名称】 halSpiReadStatus
// 【功能】 读取状态
// 【参数】 addr:地址
// ch:模块通道
// 【返回】 状态值
// 【说明】 无
//
//*****************************************************************************
unsigned char halSpiReadStatus(unsigned char addr,unsigned char ch)
{
unsigned char value,temp;
temp = addr | READ_BURST;
switch (ch)
{
case 1:
Clr_CC1101_CSN_1;
while (P1IN & 0x10);
SpiTxRxByte(temp,1);
value = SpiTxRxByte(0,1);
Set_CC1101_CSN_1;
break;
case 2:
Clr_CC1101_CSN_2;
while (P3IN & 0x10);
SpiTxRxByte(temp,2);
value = SpiTxRxByte(0,2);
Set_CC1101_CSN_2;
break;
}
return value;
}
//*****************************************************************************
//
// 【名称】 halRfWriteRfSettings
// 【功能】 寄存器设置
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halRfWriteRfSettings(void)
{
halSpiWriteReg(CCxxx0_FSCTRL0, rfSettings.FSCTRL2,1);
halSpiWriteReg(CCxxx0_FSCTRL1, rfSettings.FSCTRL1,1);
halSpiWriteReg(CCxxx0_FSCTRL0, rfSettings.FSCTRL0,1);
halSpiWriteReg(CCxxx0_FREQ2, rfSettings.FREQ2,1);
halSpiWriteReg(CCxxx0_FREQ1, rfSettings.FREQ1,1);
halSpiWriteReg(CCxxx0_FREQ0, rfSettings.FREQ0,1);
halSpiWriteReg(CCxxx0_MDMCFG4, rfSettings.MDMCFG4,1);
halSpiWriteReg(CCxxx0_MDMCFG3, rfSettings.MDMCFG3,1);
halSpiWriteReg(CCxxx0_MDMCFG2, rfSettings.MDMCFG2,1);
halSpiWriteReg(CCxxx0_MDMCFG1, rfSettings.MDMCFG1,1);
halSpiWriteReg(CCxxx0_MDMCFG0, rfSettings.MDMCFG0,1);
halSpiWriteReg(CCxxx0_CHANNR, rfSettings.CHANNR,1);
halSpiWriteReg(CCxxx0_DEVIATN, rfSettings.DEVIATN,1);
halSpiWriteReg(CCxxx0_FREND1, rfSettings.FREND1,1);
halSpiWriteReg(CCxxx0_FREND0, rfSettings.FREND0,1);
halSpiWriteReg(CCxxx0_MCSM0 , rfSettings.MCSM0,1);
halSpiWriteReg(CCxxx0_FOCCFG, rfSettings.FOCCFG,1);
halSpiWriteReg(CCxxx0_BSCFG, rfSettings.BSCFG,1);
halSpiWriteReg(CCxxx0_AGCCTRL2, rfSettings.AGCCTRL2,1);
halSpiWriteReg(CCxxx0_AGCCTRL1, rfSettings.AGCCTRL1,1);
halSpiWriteReg(CCxxx0_AGCCTRL0, rfSettings.AGCCTRL0,1);
halSpiWriteReg(CCxxx0_FSCAL3, rfSettings.FSCAL3,1);
halSpiWriteReg(CCxxx0_FSCAL2, rfSettings.FSCAL2,1);
halSpiWriteReg(CCxxx0_FSCAL1, rfSettings.FSCAL1,1);
halSpiWriteReg(CCxxx0_FSCAL0, rfSettings.FSCAL0,1);
halSpiWriteReg(CCxxx0_FSTEST, rfSettings.FSTEST,1);
halSpiWriteReg(CCxxx0_TEST2, rfSettings.TEST2,1);
halSpiWriteReg(CCxxx0_TEST1, rfSettings.TEST1,1);
halSpiWriteReg(CCxxx0_TEST0, rfSettings.TEST0,1);
halSpiWriteReg(CCxxx0_IOCFG2, rfSettings.IOCFG2,1);
halSpiWriteReg(CCxxx0_IOCFG0, rfSettings.IOCFG0,1);
halSpiWriteReg(CCxxx0_PKTCTRL1, rfSettings.PKTCTRL1,1);
halSpiWriteReg(CCxxx0_PKTCTRL0, rfSettings.PKTCTRL0,1);
halSpiWriteReg(CCxxx0_ADDR, rfSettings.ADDR,1);
halSpiWriteReg(CCxxx0_PKTLEN, rfSettings.PKTLEN,1);
halSpiWriteReg(CCxxx0_FSCTRL0, rfSettings.FSCTRL2,2);
halSpiWriteReg(CCxxx0_FSCTRL1, rfSettings.FSCTRL1,2);
halSpiWriteReg(CCxxx0_FSCTRL0, rfSettings.FSCTRL0,2);
halSpiWriteReg(CCxxx0_FREQ2, rfSettings.FREQ2,2);
halSpiWriteReg(CCxxx0_FREQ1, rfSettings.FREQ1,2);
halSpiWriteReg(CCxxx0_FREQ0, rfSettings.FREQ0,2);
halSpiWriteReg(CCxxx0_MDMCFG4, rfSettings.MDMCFG4,2);
halSpiWriteReg(CCxxx0_MDMCFG3, rfSettings.MDMCFG3,2);
halSpiWriteReg(CCxxx0_MDMCFG2, rfSettings.MDMCFG2,2);
halSpiWriteReg(CCxxx0_MDMCFG1, rfSettings.MDMCFG1,2);
halSpiWriteReg(CCxxx0_MDMCFG0, rfSettings.MDMCFG0,2);
halSpiWriteReg(CCxxx0_CHANNR, rfSettings.CHANNR,2);
halSpiWriteReg(CCxxx0_DEVIATN, rfSettings.DEVIATN,2);
halSpiWriteReg(CCxxx0_FREND1, rfSettings.FREND1,2);
halSpiWriteReg(CCxxx0_FREND0, rfSettings.FREND0,2);
halSpiWriteReg(CCxxx0_MCSM0 , rfSettings.MCSM0,2);
halSpiWriteReg(CCxxx0_FOCCFG, rfSettings.FOCCFG,2);
halSpiWriteReg(CCxxx0_BSCFG, rfSettings.BSCFG,2);
halSpiWriteReg(CCxxx0_AGCCTRL2, rfSettings.AGCCTRL2,2);
halSpiWriteReg(CCxxx0_AGCCTRL1, rfSettings.AGCCTRL1,2);
halSpiWriteReg(CCxxx0_AGCCTRL0, rfSettings.AGCCTRL0,2);
halSpiWriteReg(CCxxx0_FSCAL3, rfSettings.FSCAL3,2);
halSpiWriteReg(CCxxx0_FSCAL2, rfSettings.FSCAL2,2);
halSpiWriteReg(CCxxx0_FSCAL1, rfSettings.FSCAL1,2);
halSpiWriteReg(CCxxx0_FSCAL0, rfSettings.FSCAL0,2);
halSpiWriteReg(CCxxx0_FSTEST, rfSettings.FSTEST,2);
halSpiWriteReg(CCxxx0_TEST2, rfSettings.TEST2,2);
halSpiWriteReg(CCxxx0_TEST1, rfSettings.TEST1,2);
halSpiWriteReg(CCxxx0_TEST0, rfSettings.TEST0,2);
halSpiWriteReg(CCxxx0_IOCFG2, rfSettings.IOCFG2,2);
halSpiWriteReg(CCxxx0_IOCFG0, rfSettings.IOCFG0,2);
halSpiWriteReg(CCxxx0_PKTCTRL1, rfSettings.PKTCTRL1,2);
halSpiWriteReg(CCxxx0_PKTCTRL0, rfSettings.PKTCTRL0,2);
halSpiWriteReg(CCxxx0_ADDR, rfSettings.ADDR,2);
halSpiWriteReg(CCxxx0_PKTLEN, rfSettings.PKTLEN,2);
}
//*****************************************************************************
//
// 【名称】 halRfSendPacket
// 【功能】 一数据包发送函数
// 【参数】 *txBuffer:发送指针
// size:数据长度
// ch:模块通道
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void halRfSendPacket(unsigned char *txBuffer, unsigned char size,unsigned char ch)
{
switch (ch)
{
case 1:
halSpiWriteReg(CCxxx0_TXFIFO, size,1);
halSpiWriteBurstReg(CCxxx0_TXFIFO, txBuffer, size,1);
halSpiStrobe(CCxxx0_STX,1);
while (!(P1IN&0x01));
while (P1IN&0x01);
halSpiStrobe(CCxxx0_SFTX,1);
break;
case 2:
halSpiWriteReg(CCxxx0_TXFIFO, size,2);
halSpiWriteBurstReg(CCxxx0_TXFIFO, txBuffer, size,2);
halSpiStrobe(CCxxx0_STX,2);
while (!(P3IN&0x01));
while (P3IN&0x01);
halSpiStrobe(CCxxx0_SFTX,2);
break;
}
}
//*****************************************************************************
//
// 【名称】 halRfReceivePacket
// 【功能】 一数据包接收函数
// 【参数】 *rxBuffer:接收指针
// *length:数据长度
// ch:模块通道
// 【返回】 接收成功与否。
// 【说明】 无
//
//*****************************************************************************
unsigned char halRfReceivePacket(unsigned char *rxBuffer, unsigned char *length,unsigned char ch)
{
unsigned char status[2],a;
unsigned char packetLength;
unsigned char i=(*length)*4;
switch (ch)
{
case 1:
halSpiStrobe(CCxxx0_SRX,1);
delay(2);
while (P1IN&0x01)
{
delay(2);
--i;
if(i<1)
{
a=0;
}
}
if ((halSpiReadStatus(CCxxx0_RXBYTES,1) & BYTES_IN_RXFIFO))
{
packetLength = halSpiReadReg(CCxxx0_RXFIFO,1);
if (packetLength <= *length)
{
halSpiReadBurstReg(CCxxx0_RXFIFO, rxBuffer, packetLength,1);
*length = packetLength;
halSpiReadBurstReg(CCxxx0_RXFIFO, status,2,1);
halSpiStrobe(CCxxx0_SFRX,1);
a=status[1] & CRC_OK;
}
else
{
*length = packetLength;
halSpiStrobe(CCxxx0_SFRX,1);
a=0;
}
}
else
{
a=0;
}
break;
case 2:
halSpiStrobe(CCxxx0_SRX,2);
delay(2);
while (P3IN&0x01)
{
delay(2);
--i;
if(i<1)
{
a=0;
}
}
if ((halSpiReadStatus(CCxxx0_RXBYTES,2) & BYTES_IN_RXFIFO))
{
packetLength = halSpiReadReg(CCxxx0_RXFIFO,2);
if (packetLength <= *length)
{
halSpiReadBurstReg(CCxxx0_RXFIFO, rxBuffer, packetLength,2);
*length = packetLength;
halSpiReadBurstReg(CCxxx0_RXFIFO, status,2,2);
halSpiStrobe(CCxxx0_SFRX,2);
a=status[1] & CRC_OK;
}
else
{
*length = packetLength;
halSpiStrobe(CCxxx0_SFRX,2);
a=0;
}
}
else
{
a=0;
}
break;
}
return a;
}
//*****************************************************************************
//
// 【名称】 main
// 【功能】 主函数
// 【参数】 无
// 【返回】 无
// 【说明】 无
//
//*****************************************************************************
void main(void)
{
unsigned char leng = 4;
CpuInit();
POWER_UP_RESET_CC1100();
halRfWriteRfSettings();
halSpiWriteBurstReg(CCxxx0_PATABLE, PaTabel, 8,1);
halSpiWriteBurstReg(CCxxx0_PATABLE, PaTabel, 8,2);
for(;;)
{
TxBuf[0]=0x01;
TxBuf[1]=0x02;
TxBuf[2]=0x03;
TxBuf[3]=0x00;
halRfSendPacket(TxBuf,leng,1); // Transmit Tx buffer data
delay(10000);
if(halRfReceivePacket(RxBuf,&leng,2))
{
RxBuf[3]=' ';
P10OUT |= BIT6;
P10OUT &= ~BIT7;
RxBuf[0]=0x11;
RxBuf[1]=0x22;
RxBuf[2]=0x33;
RxBuf[3]=0x00;
&n